Friday, 22 August 2014

Network Topology ( PART 1 )

Assalamualaikum and Good Evening everyone! Today I would like to share something with u guys related to my studies. Hope to see your feedback about this!

What is a network topology?
In communication networks, a topology is a usually schematic description of the arrangement of a network, including its nodes and connecting lines.

There are two ways (2) of defining network geometry :

1.The physical topology
The physical topology of a network is the actual geometric layout of workstations. There are several common physical topological, as described below and as shown in the illustration.

Type of physical topology

1.Star network topology, there is a central computer or server to which all the workstations are directly connected. Every workstation is indirectly connected to every other through the central computer.

2.Ring network topology, the workstations are connected in a closed loop configuration. Adjacent pairs of workstations are directly connected. Other pairs of workstations are indirectly connected, the data passing through one or more intermediate nodes.

3.Mesh Network topology employs either of two schemes, called full mesh and partial mesh. In the full mesh topology, each workstation is connected directly to each of the others. In the partial mesh topology, some workstations are connected to all the others, and some are connected only to those other nodes with which they exchange the most data.

4.Extended Network this involves two or more repeaters between the central nodes. Repeaters are used to extend the transmission distance that the central node can cover. A hybrid network topology is created when the repeaters are replaced with more intelligent devices like switches, hence called a physical hierarchical star topology.

5.Hierarchical Network is the type of network topology in which a central "root" node (the top level of the hierarchy) is connected to one or more other nodes that are one level lower in the hierarchy (i.e., the second level) with a point to point link between each of the second level nodes and the top level central "root" node, while each of the second level nodes that are connected to the top level central "root" node will also have one or more other nodes that are one level lower in the hierarchy (i.e., the third level) connected to it.

6.Bus Network is a network topology in which nodes are connected in a daisy chain by a linear sequence of buses

2.The logical (or signal) topology.

Logical (or signal) topology refers to the nature of the paths the signals follow from node to node. In many instances, the logical topology is the same as the physical topology. But this is not always the case. For example, some networks are physically laid out in a star configuration, but they operate logically as bus or ring networks.

CREDIT 1

No comments:

Post a Comment